- Architectural and Cementitious
- Interior/Exterior Wall & House Paints
- Construction, Adhesives & Sealants (CAS)
- Pressure Sensitive Adhesives
- Concrete Sealers
- Other Adhesives
- Direct to Metal (Industrial Maintenance & OEM)
- Lower VOC Alternative
- Conventional Solvent-Borne Resins
EPS 2103 is an all acrylic emulsion that is an excellent choice for use as a modifier/additive for the cementitious base coat and as the binder for the finish coat for EIFS systems. When used for Exterior Insulation Finish Systems (EIFS), EPS 2103 offers good flexibility, color fastness, resistance to chalking and yellowing, and dirt pick up resistance. EPS 2103 can also be used as a polymer admixture for cement based products. EPS 2103 offers high alkali stability, reduces permeability of cement matrices and improves flow of cement based systems products.
EPS 2111 is an all acrylic binder that can be used in lamination especially in blending with latex polychloroprene with no loss of adhesion. The polymer has broad adhesion to various substrates and good 180° peel and heat resistance. This polymer can also be used in high P:B loadings for pigmented caulks. Not FDA approved.
EPS 2113 is an all acrylic latex pressure sensitive adhesives for permanent type applications. The polymer has also shown to be useful in formulating plasticizer free-pigmented caulks and film to film lamination. This product is not FDA approved.
EPS 2117 Is an all acrylic emulsion for use in pigmented caulk formulations. When properly formulated, this latex will pass low temperature flexibility, package stability, and other ASTM C 834 requirements. The polymer has broad adhesion to various substrates. Not FDA approved.
EPS 2257 is an all-acrylic, APEO-free emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. Gloss increases with multiple applications. Exterior exposure testing is in progress for exterior wood stains.
EPS 2293 is a self-crosslinking all-acrylic emulsion offering excellent adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. Clear coatings can be formulated less than 100 g/l VOC.
EPS 2705 is an all-acrylic emulsion offering excellent exterior durability and adhesion for use in exterior flat and satin finish house paints. EPS 2705 offers advanced dirt resistance technology to improve the brightness and appearance of exterior coatings.
EPS 2708 is an all-acrylic emulsion designed for high alkaline applications. It can be used as a polymer admixture for cement-based products or as a binder for coatings and primers over cementitious substrates.
EPS 2757 is an APEO-free all-acrylic emulsion designed for high performance flat through semi-gloss interior and exterior architectural coatings. High performance 0 VOC coatings are achievable using the EPS 9147 coalescent. Freeze-thaw stability, even at 0 VOC, can be achieved with the use of commercially available additives such as Rhodia FT-100.
EPS 2772 is an APEO-free 100% acrylic emulsion designed for high performance gloss interior and exterior architectural coatings that require excellent block resistance. EPS 2772 offers an excellent balance of properties for use in architectural high gloss and semi-gloss pastel through neutral tint bases.
EPS 2792 is an APEO-free all-acrylic emulsion designed for high performance flat through semi-gloss interior architectural coatings. High performance 0 VOC coatings are achievable using the EPS 9147 coalescent. EPS 2792 has excellent resistance to household stains and offers outstanding scrub resistance.